The hot-dip galvanized coating is made up of 98% zinc – a natural, healthy metal. Zinc exists naturally in the air, water, and soil and is the 27th most abundant element in the Earth’s crust. More than 5.8 million tons of zinc is naturally cycled through the environment by plant and animal life, rainfall, and other natural activity. And zinc is essential for all life – from humans to the smallest microorganisms. Therefore, utilizing hot-dip galvanized steel is not harmful to the environment as the zinc is already naturally found in the area.
In addition to being natural, zinc, like steel, is infinitely recyclable without the loss of any physical or chemical properties. Approximately 30% of the world’s zinc supply comes from recycled sources each year, and more would be recycled if it were available. Furthermore, steel is the most recycled material in the world with virtually 100% of structural steel coming from recycled sources, making galvanized steel an infinitely renewable material.
Figure 2 Steel& zinc Recycle Loop
A life-cycle assessment (LCA) is an objective measurement of a product’s environmental impact. Often called a “cradle-to-grave” study, LCA quantifies the environmental impact of a process or product from raw material acquisition, energy inputs and emission outputs during production and use, and end-of-life management recycling/disposal). LCAs have begun to gain favor in the specification community as a means of gauging a product’s sustainability.
In 2008, the International zinc Association (IZA) hired internationally renowned LCA experts Five Winds International and PE International to conduct a life-cycle inventory (LCI) and life-cycle assessment (LCA) for hot-dip galvanized steel. Utilizing data from worldwide sources regarding energy consumption and air/fluid/solid emissions measured during zinc roduction and during the actual galvanizing process, combined with analogous survey data collected from the steel industry, an LCA for hot-dip galvanized steel was compiled. This study provided a baseline understanding of the industry’s impact today, one the AGA is committed to improving in the future.
Hot-dip galvanizing is unique in that all material and energy inputs and emission outputs are isolated to the production phase. HDG requires no maintenance during the practical service life of most structures, i.e. 75 years or more. This means no transportation of labor to the repair site, no energy, no emissions such as sand from blasting or paint dust during removal, and no materials are needed after the initial production and installation of the HDG steel.
Additionally, hot-dip galvanized steel is the most recycled material in the world with approximately 90% of steel and 80% of all available zinc reclaimed for recycling. The energy required to produce the recycled product is 30% less than required to produce virgin HDG steel.
In addition to the LCA study conducted through IZA, two previously published cases studies were performed in Europe displaying the environmental impact differences between hot-dip galvanized steel to painted steel. These case studies show that although steel is the primary component in both LCAs, the coating does make a difference in the overall environmental impact. (American Galvanizer Assosication, 2016)
1.) American Galvanizers Association. (2016. 6) HDP Environmental Cost [Online] Available at: http://www.galvanizeit.org/hot-dip-galvanizing/is-galvanizing-sustainable/hdg-environmental-cost
Shanghai Metal Corporation is a trusted aluminum alloy, aluminum foil price, stainless steel price and stainless steel manufacturer, kinds of stainless steel in china.
Guest contributors are welcome at the Alloy Wiki.It is a weekly wiki and guide on alloy information and processing technology, while also about the vast array of opportunities that are present in manufacturing. Our team of writers consists of a Machining Material Supplier / Machinist / Tool and Die Maker, a Biomedical Engineer / Product Development Engineer, a Job Development Coordinator / Adjunct Professor, and a President and CEO of a manufacturing facility.
Food-grade silicone tube silicing raw materials, by scientific formula and advanced technology processing. The product has soft, high temperature resistance, high transparency, tasteless, non-yellowing, non-spray...
Compared with traditional cleaning methods such as mechanical friction cleaning, chemical corrosion cleaning, liquid solid strong impact cleaning, and high-frequency ultrasonic cleaning, laser cleaning has...
2013-09-26 13:56Stone engraving machine development direction Current people’s aesthetic constantly changing, more respect for nature, focusing on beautiful, more focus on health, pollution-free, pollution-free, natural...